Four Best 3D Pens for Professionals
Create 3D designs with this device. Whether you are a child or an adult, you will definitely enjoy using a 3D writing pen. There are many of them available in the market today. The four we have outlined below are the best suited for professionals.
- MYNT3D Professional Printing 3D Pen
1 place :
-
The MYNT3D Professional Printing 3D Pen has a smart ultra-slim and ergonomic design for easy handling. Its rectangular shape is similar to the 3Doodle. The settings buttons are just on the side where you can reach them conveniently.
You can easily monitor any changes in its temperature as it comes with an OLED display. It is equipped with a precision-crafted stylus that you can use to doodle, paint or sketch 3D objects. Using the buttons, you can adjust the speed for more intricate projects.
As long as the thermoplastic is 1.7mm long and melts at 130 C to 240 C degrees, you can use it as your filaments. Another feature we like about the MYNT3D is that you can plug it into your power bank or your computer since it is USB powered. This means that you can use it outdoors.
While most models would have a clogged nozzle if the temperature gets too high, the MYNT3D model has a modular nozzle, so you can quickly replace it once it becomes unusable.
Q: How offten does this pen jam and how do you clear it?
A: What we did was to remove the nozzle piece, put it in a conventional oven at 190C for about 10 minutes and were then able to pick the jam out with a pin.
Q: What is the housing made out of and does it have a pocket clip?
A: Main housing is plastic. There is no pocket clip. Would not want to put a high temp device in my pocket in any case.
Q: Does it have a continuous flow option? I have very little dexterity in my hands. Thank you.
A: Yes it does. You can double click the feed button to enter continuous flow mode. Just press it again to exit.
-
-
- pros +
- Smart design Portable With a replaceable modular nozzle Allows different types of materials
-
- cons -
- Extrusion is slow Noisy
-
- AtmosFlare 3D Pen
2 place :
-
The AtmosFlare 3D Pen has a bulky design compared to the slim and lightweight models on our list. Still, it is very manageable and easy to handle. This tool offers portability as it is wireless and battery-operated. The wires of other models are sometimes too short that it slows down your work. AtmosFlare eliminated that hassle.
AtmosFlare’s new technology uses a gel resin form of special ink that hardens once exposed to UV light. It is pretty impressive since you can immediately touch it, unlike plastic materials that can burn you if you accidentally touch them while still drying.
The wireless and ink curing features make it safe to use even for children, not below 12 years of age. You do not have to worry about the tool getting too hot or the wires tangling.
You can also layout your project on any type of material as the ink sticks to almost anything. Cleaning is rather easy; you can even use rubbing alcohol or a hand sanitizer in removing the residue. In addition, it comes with several tutorial videos so you can easily learn how to use the creative tool safely.
Q: How hot does the LED tip get?
A: The tip of the pen doesn't heat up at all. Instead, Atmosflare uses lights that cure the ink. No heat is used, unlike as is the case with other 3D pens the use 500 degree tips to let plastic filament.
Q: Can u refill the pen?
A: Yes, there are different color cartridges that are easily interchangeable. You just pop out one color cartridge and add another. Lots of great color options too.
Q: Is this concept something like a fine tipped hot glue gun with fast setting colored glue?
A: Yes, exactly that. My 16 year old had fun with it for about 20 minutes.
-
-
- pros +
- Cleans easily Cures ink using UV light Safe even for kids as young as 12 years old
-
- cons -
- There are reports of defective items There are reports of poor quality
-
- Scribbler 3D Printing Pen V3
3 place :
-
The Scribbler 3D Printing Pen is very manageable with its lightweight and slim design. This is Scribbler’s newest version, and it boasts of its improved design and performance.
This 3D tool contains no metal pieces as it is made of ceramics. It features an OLED display that allows you to understand all the data for its operation mode. The plastic case is heat-resistant which makes it safe from burning your hand while using. It is available in 8 different colors.
You will get a free stencil eBook together with this model. Beginners will find those especially useful for practice.
You can easily regulate the speed and temperature of the Scribbler as it has buttons that allow you to adjust the settings. We like its quick cleaning feature as you can switch between filaments easily. This versatile pen accommodates different types of materials. You can create your project using any type of filament you want.
As for a safety feature, the scribbler shuts off automatically when not in use for about 90 seconds. This lowers the risk of overheating. What we like best about this product is its satisfaction guarantee. You can return the product within 30 days if it fails to meet your expectations. If the item malfunctions within 180 days, you can ask for a free replacement.
-
-
- pros +
- Precise and easy to handle Satisfaction Guarantee Warranty Versatile
-
- cons -
- Defective items Product malfunctions within a few days of purchase Quick cleaning feature fails sometimes
-
- 3Doodler Create 3D Pen with 50 Plastic Strands
4 place :
-
The 3Doodler Create 3D Pen is the strongest, lightest and slimmest model of 3Doodler. This improved design makes it easier to use and less noisy. The body is rectangular, making it more convenient to press the controls. It also has a lightweight case made of sleek aluminum. With its shape, build, weight and look, it is one of the most elegant 3 out there.
This tool is not just pretty; it also features an advanced drive system that allows it to operate faster and smoother. It can accommodate various kinds of plastic depending on how you want your design to look and feel. It has a power light indicator, so you know when your pen is on. It comes equipped with two settings for temperature and two different speeds that you can control with just a press of a button.
>The plastic that it extrudes cools down immediately for you to have a stable and solid structure. The 3Doodler Create gives you versatility and convenience in drawing your 3D design.
-
-
- pros +
- An easy-to-use slim design Has two heat settings Has various styles and filament colors Has a 1-year warranty
-
- cons -
- Expensive Jammed filaments
-
Types of 3d Pens
Best 3d Pens Come In Two Forms:
- “Hot” type (using plastic threads). This one draws with plastic; it works from electricity and requires careful handling.
- “Cold” type (using photopolymer resins). This type draws with a liquid resin; it is equipped with a battery and a UV emitter, making it safer to use.
Hot
This type must be connected to the mains. They can be powered from a standard outlet, a computer, and from a portable charger. Plastic is a thread with a diameter of 1.75 mm. Before you insert the elastic thread in the socket, you need to set the desired temperature. This can be different, depending on the type of plastic:
- ABS – 210 – 240 degrees;
- PLA – 180 – 220 degrees;
- PRO – 200 – 220 degrees;
- KID – 75 – 95 degrees.
After selecting the temperature, wait until the pen heats up. You can follow the heating by the green indicator that has turned on, or the maximum value that you have selected appears on display. It is essential that, before you insert the plastic thread into the socket, cut it at the end with scissors so that there are no bends. This will prevent the device from clogging. Once the plastic thread is inserted, click on the plastic feed button and start drawing. Molten plastic will begin to exit the nozzle. Start painting in the air or on the surface. Remember that the tip may heat up (not in all models). Be careful to get burned if touched. Upon completion of the drawing, you need to pull the elastic thread by pressing the plastic removal button. The plastic will automatically start coming out of the socket, unplug the handle from the power supply and allow it to cool completely; then it can be removed.
According to the Review, the Main Benefits of This Type Are:
- Large assortment: the ability to draw in space and on paper;
- Comfortable ergonomics controls
- A wide range of working material
- Affordable prices
- Crafts are durable and colorful.
Among the Disadvantages Mentioned in the 3D Pen Review Are:
- You can get burned. Children should draw under the supervision of adults.
- Limited drawing by plastic length.
Cool
This type of 3D pens does not have a heating element, unlike the one, which draw with hot plastic. A photopolymer comes through the nozzle. It hardens under the influence of the ultraviolet light source built into the device. As a rule, ink hardening occurs instantly. Several ultraviolet diodes act as a source of ultraviolet light. In operation, it uses ink cartridges with polymers. Photopolymers compare favorably with plastic in that they can be colored, elastic, and luminescent, as well as magnetic, and there are also thermo polymers that change color depending on the ambient temperature. However, precautions should be observed here. For example, when using cold variation, it is recommended to wear special glasses that protect the eyes from ultraviolet radiation. Also, the absence of a heating element makes the presence of a noisy fan unnecessary and eliminates the inhalation of toxic plastic fumes (in particular, hot plastic). The 3D pen does not have to be connected to the power supply or the USB port during operation since they are capable of operating from the internal battery. The built-in battery is usually enough for a couple of hours of continuous work, and the charge indicator of the device will tell you when it’s time to connect to the micro USB. To change the consumables, replace the ink cartridge capsule.
Ultraviolet 3D Pens Can Work in Three Modes:
- Extrusion of a photopolymer with UV-diodes turned on – the polymer is squeezed out of the handle, highlighted with ultraviolet and freezes
- Extrusion of a polymer without including a source of ultraviolet (UV) radiation — the necessary amount of photopolymer is squeezed out, and a form is created, then the light is turned on,
- Turning on the LEDs without extruding the polymer – this mode allows you to turn on only the source of UV, without feeding the photopolymer.
- With an ultraviolet model, you can always first squeeze out the photopolymer and give it the desired shape. For example, using specially designed tools, or a regular toothpick or screwdriver, and then lights the finished workpiece with ultraviolet light.
The 3D Pen Review Proves That the Main Benefits Are:
- Lack of heating elements;
- Fully autonomous work, due to the in-built battery;
- A wide selection of ink (photopolymers).
Disadvantages That Were Noticed in the 3D Pen Review Include:
- High cost, there are models with low prices, but they are inferior in quality to “hot pens”;
- The large size, inconvenient to hold in children’s hand;
- Crafts are fragile and dull;
- Unpleasant smell;
- The UV radiation in large quantities, harmful to eyesight.
Buying Guide - What to Look At?
Technical Features
Dimensions of the Pen
Cold pens have large dimensions, compared to hot ones since they have a built-in cartridge. The length of the devices varies from 17 to 18.8 cm. Weight also plays an important role. The smoother the pen is, the more comfortable it is to hold it in your hand. Most often, you can find models weighing from 36 to 65 grams.
Display
The display is needed to monitor the temperature and speed of the plastic supply. The display is of two types – OLED and LCD. They differ only in that the OLED is brighter.
Plastic Feed Rate
The more plastic feed rates are; the more options for detailing crafts becomes. The speed is from 1 to 9. Each one has a different number of speeds.
Pen Nozzle
This can be both ceramic and metal. The metal nozzle is more durable compared to ceramic. The diameter of the nozzle can vary from 0.4 to 1 mm.
Auto-off Function
In the absence of activity with a 3D pen, it cools off in 2-5 minutes.
Automatic Feeding and Removal of Plastic
To start drawing or removing plastic, press the button twice. It is no need to hold your finger on the button. This facilitates the drawing process.
Power Type
Can be charged from USB, built-in battery, from a regular power outlet. Built-in battery or Power Bank makes it possible not to depend on extra wires. The drawing process becomes much more convenient.
Work Material
It is essential to pay attention to the type of material that this or that 3D item uses since you need to purchase plastic or cartridges separately. And if the plastic does not fit, you ruin the device, and it will stop working.
Safety of Operation
When working with a device that is connected to the outlet, you must follow the rules prescribed for the operation of electrical appliances. Also, you should not touch the nozzle of the device when working with hot ones, or you can get burned. A child under four years old is not recommended to use the drawing tool. There are models designed for the smallest from 4 years. When buying this device, it is worth paying attention to the recommended age of the child who will use it. Parents must ensure that the child does not get burned, does not damage the wire from the device to the outlet. This applies to those that use ABS, PLA, and PRO plastic. Pens that draw with plastic KID cannot burn you.
Price Category
The cost varies. However, if the pen is not expensive, it does not mean that it is terrible. Just by technical features, it is inferior to more expensive models.
Manufacturer
It is of utmost importance to note that, on the market, there are enough fakes of the most popular drawing devices. The most common is the 3doodler models.
Reviews
This is one of the essential parameters worth paying attention to. Comments by users of this device can tell a lot about a particular model. It is also worth relying on the opinion of an experienced operator – the seller.
Final Advice
Modern advanced models of the third and fourth generation will undoubtedly please with their functions and subtleties both amateurs and professionals of three-dimensional drawing. Different manufacturers offer devices for drawing three-dimensional shapes. Several models from our list won good reviews from consumers. They have become popular due to its quality and ease of use. However, CreoPop Professional is the personification of the entire market. Consumers choose it for the unique design of the whole line. All models are created according to the latest trends in advanced technology. It is compact and easy to use. Among other benefits are affordable prices, durability, and quality of parts, adjustable plastic feed rate, a large number of color solutions, the adjustable temperature for heating, informational diode indicators, and quick response to user requests. It is thus not gainsaying that all products are certified!
